Honeywell Tradeline VS820A1047 Gas Single Valve, Standard Opening, BtuH

Description

Honeywell Tradeline VS820A1047 Gas Single Valve, Standard Opening, BtuH. Condition is "New". Shipped with USPS Priority Mail.
Standard PowerPile Millivolt Combination Gas Valve - 1/2" NPT x 3/4" NPT
Description
Product Overview:
These gas controls combine a Lite-Rite manual gas cock, safety shutoff Pilotstat assembly, millivoltage automatic valve operator, and optional gas pressure regulator. They require the use of a 750 mv Powerpile generator (thermopile). The generator, heated by the pilot burner flame, provides the electrical energy to operate the combination gas control. A millivoltage thermostat with suitable accessory controls completes the automatic control system for the heating appliance.
Product Features:
Includes pilot flow adjustment screw
Easy to install, adjust and service; all adjustments and connections are accessible from top of control
Add separate energy cutoff (ECO) where codes call for dual safety shutoff
Complete safety shutoff on pilot flame failure
LITE-RITE (OFF-PILOT-ON) lighting sequence
ECO connector for V800 models, Part No. 392451-1
Product Specifications:
Description: 1/2 in. NPT x 3/4 in. NPT PowerPile Millivolt Combination Gas Valve with 3.5 in. wc adjustable pressure regulator setting
Application: Self-powered automatic control - Use with 750 mV pilot generator
Type of Gas: Natural
Pressure Regulator: Standard
Electrical Ratings: 750 mV
Mounting: 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically
Body Pattern: Straight-through - multi-tapped with 1/2 in. right and left outlets plugged, except as noted
Pressure Tapping: 1/8 in. npt with plug
Pilot Gas Outlet: Compression fitting for 1/4 in. OD tubing
Inlet/Outlet Size (in.): 1/2 in. NPT x 3/4 in. NPT with 1/2 in. NPT side outlets
Pressure Regulator Setting (psi): 3.5 in. wc Reg. Set/3-5" Adj. Range
Pressure Regulator Setting (kPa): 0.87 kPa
Pressure Ratings (psi): 1/2 psi
Pressure Ratings (kPa): 3.5 kPa
Electrical Connections: Terminal block has 3 combination screw and 1/4 in. quick connect terminals
Temperature Range (F): 32 F to 175 F
Temperature Range (C): 0 C to 79 C
Dimensions (in.): 4 3/4 in. high x 4 1/16 in. wide x 3 3/16 in. deep
Dimensions (mm): 121 mm high x 103 mm wide x 81 mm deep
Approvals, Underwriters Laboratories Inc: UL Component Recognized
Approvals, American Gas Association: AGA Design Certified: File no. L2025003
Approvals, Canadian Gas Association: CGA Design Certified: File no. L2025003
Includes: One 3/4" x 1/2" reducer bushing, one 1/2" x 3/8" reducer bushing